No products in the cart.

Search

01473 242344 | info@rt-is.co.uk

  1. Courses
  2. RT Training Solutions

RT Training Solutions

91 Dales Road
Ipswich, IP1 4JR United Kingdom Get Directions
Today

SWT MOD4

RT Training Solutions 91 Dales Road, Ipswich

ENTRY REQUIREMENTS: Ideally the candidate would have attended Module 3C and Module 5 courses and should have good railway signalling experience. Please note that we will provide you with a Course Certificate of Competency; however this is not a Signal Works Testing Certificate of Competency; this will have to be provided by your employer and you will be subject to the usual mentorship and IRSE licensing process. COURSE SUMMARY: Introduction hands on session, explanation and discussion in: Track, Point ,Signal, AWS testing Use of various test equipment Recording and documentation practicals Practical session and Assessments Theory Assessment The course will be led by an experienced Functional Tester. It includes activities on both relay-based and solid state Interlocking systems. Duration: 5 days   |   Delegates: 6   |   Venue: RT Training Solutions in Ipswich

£1925

SPWEE (Safety Precautions when working with electrical equipment)

RT Training Solutions 91 Dales Road, Ipswich

The Electricity at Work Regulations 1989 came in to force on 1st April 1990. The purpose of the regulations is to require precautions to be taken against the risk of death or personal injury from electricity during work activities. OBJECTIVES: At the end of this course successful delegates will be able to: Work on voltages in excess of 175V Have an understanding of the Electricity at Work Regulations General awareness of the dangers of electricity Demonstrate by means of a theory assessment the difference between protective and local isolations ENTRY REQUIREMENTS: Basic knowledge of Electrical Principles is ideal.

£180

PTS Initial + DCCR + ICI

RT Training Solutions 91 Dales Road, Ipswich

PERSONAL TRACK SAFETY (PTS) - INITIAL Designed for staff who will work within Network Rails infrastructure, determining their responsibilities and duties. OBJECTIVES: To gain PTS competance through Sentinel accreditation ENTRY REQUIREMENTS: On passing a Medical and providing a Negative Drugs and Alcohol Screening in accordance with Railway Group and Network Rail Standards Candidates can then sit upon a P.T.S Course. COURSE SUMMARY: Getting to know the Infrastructure Are You Fit for work The Sentinel Scheme Going onto the Railway Walking in a group and working During the work Clear Communication Emergency Situations Track Visit Theory and Practical Assessments DCCR Includes ICI Duration: 2 days   |   Delegates: 12   |   Venue: RT Training Solutions in Ipswich

£249
Featured Featured

Signalling Installer Program (IRSE 1.2.110 Mapped)

RT Training Solutions 91 Dales Road, Ipswich

Based in Ipswich (Suffolk), our training services have been fundamentally recognised as being pro-active, effective and, above all, technically competent. This program gives the candidate the required competencies to become a railway Signalling Installer. The training is an intensive 6 week course, filled with all the safety critical, signalling, technical and electrical knowledge needed to pursue a career within the rail industry. By completing all of the modules listed below, this program is delivered in accordance with the IRSE (Institute of Rail Signal Engineers) licensing scheme conditions. As such, the program satisfies the knowledge requirements that enable delegates to apply for licensing after the appropriate experience criteria has been met. This program is mapped towards achieving IRSE category 1.2.110 and includes the competences required for registration with the Engineering council at the grade of EngTech. (The Engineering Council stipulates a minimum education requirement Equivalent to BTEC L3 or NVQ L3)....

£200

TMTH Initial

RT Training Solutions 91 Dales Road, Ipswich

OBJECTIVES: At the end of this course successful delegates will be able to: Carry out Defined Tests, follow and apply the procedures and deal with the documentation specified in the Telecommunications Maintenance Testing Handbook. ENTRY REQUIREMENTS: Delegates must have experience of assisting with fault finding on Telecoms equipment and be competent in circuit reading, relay inspection, cable core and colour identification. Competent in the use of multimeter, insulation tester and bell/buzzer unit. COURSE SUMMARY: Introduction Requirement for independence in testing Test plans and how to use them Method statements Correlation of diagrams and existing equipment Theory and practical assessments Duration: 2 days   |   Delegates: 6   |   Venue: RT Training Solutions in Ipswich or suitable location in the UK

£715

Manual Handling

RT Training Solutions 91 Dales Road, Ipswich

Manual handling activities are the cause of numerous accidents in the workplace and also long term disorders such as back pain and reduced mobility. This course will enable delegates to look carefully at their own work activities and contribute to the safe handling of others. ENTRY REQUIREMENTS: N / A COURSE SUMMARY: Introduction: What is Manual Handling? Responsibilities imposed by the Manual Handling Operations Regulations 1992 Manual handling injuries Completing manual handling assessments Controlling the risks Safer handling techniques How to complete any forms and documentation provided

£115

SIGNAL FAILURE INVESTIGATION LEVEL ONE COURSE

RT Training Solutions 91 Dales Road, Ipswich

Designed for Signal Maintenance Testing staff who are required to investigate reported wrong side failures, and who could potentially be involved in serious incidents. OBJECTIVES: At the end of this course successful delegates will be able to: Carry out the procedures within SFI Recognise the need for escalation, and be able to carry out the three testing levels within the code of practice. ENTRY REQUIREMENTS: Delegates attending this course must be an experienced SMTH tester. COURSE SUMMARY: Introduction Can you recognise right and wrong side failures (competence must be demonstrated in order to continue) Purpose of SFI Equipment included in SFI Escalation procedures Section T guide Serious incidents Testing for reported wrong side failures (practical assessment on a signal and track Circuit). Theory and practical assessments Duration: 2 day  |   Venue: RT Training Solutions in Ipswich

£425

SIGNAL FAILURE INVESTIGATION LEVEL TWO COURSE

RT Training Solutions 91 Dales Road, Ipswich

Designed as a follow on course for Signal Maintenance Testing staff who are required to investigate reported wrong side failures, and who could potentially be involved in serious incidents. On successful completion all competent delegates will be issued a certificate of attendance OBJECTIVES: At the end of this course successful delegates will be able to: Lead a team investigating failures Supervise a member of technical staff, providing advice or endorsement of actions Prepare a report for consideration by Level 3 staff ENTRY REQUIREMENTS: Delegates attending this course must be experienced SMTH tester holding SFI Level 1 COURSE SUMMARY: Introduction Understanding SFI level 2 responsibilities and limits of authority Collating evidences Preparing reports and documentation Serious incidents Testing for reports, practical scenarios Theory and practical assessments Duration: 2 days  |   Venue: RT Training Solutions in Ipswich

£425

Personal Track Safety (PTS) Recertification + DCCR

RT Training Solutions 91 Dales Road, Ipswich

Designed for staff who’s current competency is nearing its end and will be required to go On or Near the Line in the future. OBJECTIVES: to recertify PTS competence through Sentinel accreditation ENTRY REQUIREMENTS: In date Medical and proof of Negative D&A is required before sitting upon a P.T.S Re-cert. COURSE SUMMARY: Introduction Course Workbook View and Discuss Video Safety Critical Communication Refresher Training Dependant on course workbook results Drug and Alcohol Training Theory Assessment DCCR

£159

IBCL/HY-DRIVE

RT Training Solutions 91 Dales Road, Ipswich

This course is designed for members of staff who are required to gain a competence in the installation and setting up of IBCL / Hy-Drive points. OBJECTIVES: At the end of this course successful delegates will be able to: Carry out installation of IBCL / Hy-Drive points, including supplementary drives, supplementary detectors and adjustable stretcher bars Carry out final checks and understand the requirements for the Testing of the Hy-Drive System ENTRY REQUIREMENTS: Ideally the candidate will have attended the Signalling Appreciation, Basic Diagram Reading courses, and must have attended a full five day Clamplock installation or maintenance course prior to attending the IBCL FLFM Three day course. COURSE SUMMARY: Introduction Principles of operation IBCL and Hy-Drive component variations Mechanical and Electrical Operation Final checks including Testing Please note : 3 day course for delegates with clamplock experience

£999

RISQS_Verified_Logo - png NEW
ELCAS LOGO 2020
RISQS_Verified_Logo - png NEW
ELCAS LOGO 2020

Acquire the skills you need to succeed

JOIN OUR MAILING LIST

About RT Training

RT Training Solutions is an established training company, delivering a variety of accredited face-2-face and E-learning courses throughout the UK.

We believe that engagement with everybody who has involvement with our company is fundamental to achieving our vision.

Important Information

Share

© 2019, RT TRAINING SOLUTIONS IS A TRADING DIVISION OF RT INFRASTRUCTURE SOLUTIONS LTD | REGISTERED OFFICE: 91 DALES ROAD, IPSWICH, SUFFOLK IP1 4JR | Website by Finley Design